A4T Backplate¶
Overview¶
StealthChanger Backplate for the A4T.
Z Joints
Replacement of your Z joints with a lower profile such as hartk123's GE5C Z Joint or Ellis'Short Z Joints are recommended to avoid bottoming out your Z carriage on the deck panel when using A4T.
LDO CNC Shuttle
It is recommended that 13mm long pins are used with the LDO CNC Shuttle due to it having tapered bushings. 13mm pins are included with the LDO Tool & Dock Kit.
- A4T Backplate x1 [Link]
-
4mmx12-13mm rounded pins with M3 internal thread x3 [AliExpress] [Amazon US]
-
M3 Heat Inserts x4-5
-
M3x6 FHCS screws (Must be ferrous) x2
-
M3x10 SHCS screws x2
-
M3x8 BHCS screws x1
-
6x3mm tapered magnet with M2x8 FHCS screw (Alternatively 6x3mm magnet to be glued) x1
-
M3x6 BHCS screws x2
-
Optotap Sensor x1 [AliExpress]
Assembly¶
Install the 4 heat inserts into the backplate. Optionally, you can install a fifth heat insert in the rear of the backplate for a PCB mount.