Skip to content

DragonBurner Backplate

DraftShift Design

Overview

StealthChanger Backplate for the DragonBurner.

LDO CNC Shuttle

It is recommended that 13mm long pins are used with the LDO CNC Shuttle due to it having tapered bushings. 13mm pins are included with the LDO Tool & Dock Kit.

  • DragonBurner Backplate x1 [Link]

  • DragonBurner Spacer x1 [Link]

  • 4mmx12-13mm rounded pins with M3 internal thread x3 [AliExpress] [Amazon US]

  • M3 Heat Inserts x2

  • M3x6 FHCS screws (Must be ferrous) x2

  • M3x10 SHCS screws x2

  • M3x8 BHCS screws x1

  • 6x3mm tapered magnet with M2x8 FHCS screw (Alternatively 6x3mm magnet to be glued) x1

  • M3x6 BHCS screws x2

  • Optotap Sensor x1 [AliExpress]

Assembly

The Spacer is not used for the purpose of this guide. Put it aside in a safe place until building the toolhead.

Loading Backplate - DragonBurner...
Azimuth: 0°
Polar: 0°
Distance: 0
Pan X: 0
Pan Y: 0
Step 1 of 10