JabberWocky Backplate

DraftShift Design

Overview

Summary Printed BOM Hardware BOM Resources

StealthChanger Backplate for the JabberWocky.

• The Spacer is not used for the purpose of this guide. Put it aside in a safe place until building the toolhead.

• JabberWocky Backplate x1 [Link]

• JabberWocky Spacer x1 [Link]

• 4mmx12mm rounded pins with M3 internal thread x3 [AliExpress] [Amazon US]

• M3 Heat Inserts x2

• M3x6 FHCS screws (Must be ferrous) x2

• M3x10 SHCS screws x2

• M3x8 BHCS screws x1

• 6x3mm tapered magnet with M2x8 FHCS screw (Alternatively 6x3mm magnet to be glued) x1

• M3x6 BHCS screws x2

• Optotap Sensor x1 [AliExpress]

• DraftShift StealthChanger Github

Assembly

Remove the built-in supports from the backplate.

Loading Backplate - JabberWocky...

Azimuth: 0°

Polar: 0°

Distance: 0

Pan X: 0

Pan Y: 0

Step 1 of 9