Fanny Pack¶
Overview¶
This guide will walk you through the assembly of the Fanny Pack.
Distribution Board
The guide shows LDO's Nitehawk Hexa board, all supported boards mount in a similar way.
-
Base x1 [Link]
-
Main Bracket x1 [Birds Nest] [CEB] [Dual Mellow Expand] [FYSETC CAN Bus Distribution Board] [Hexa v1.3] [MOAR CAN v2] [WAGO 6x5] [WAGO 8x5]
-
Sub Bracket x1 [Wago 2x5]
-
Mini DC-DC Buck Converter (Optional) x2 [Link]
-
M3x6 BHCS Screws x6-10
-
M3 Heat Inserts x6-10
-
6x3mm Magnets x8
Assembly¶
Install 4 heat inserts into the rear of the base.
Loading Fanny Pack...
Azimuth: 0°
Polar: 0°
Distance: 0
Pan X: 0
Pan Y: 0