Wire Duct¶
Overview¶
This guide will walk you through the assembly of the Wire Duct.
Scaled to fit
The Wire Duct Connector needs to be scaled to suit your build. It can be scaled in the slicer.
-
Wire Duct Base x1 [Link]
-
Wire Duct Cover x1 [Link]
-
Wire Duct Connector x1 (Scale to fit) [Link]
-
90 Degree Adaptor x1 [Link]
-
EMS Brackets xOptional [Arduino Uno] [WLED Board]
-
M3x6 BHCS Screws x4
-
M3x10 BHCS Screws x2
-
M3x8 SHCS Screws x4
-
M3 Hex Nuts x6
-
M3 T-Nuts x2
-
M3 Hammerhead Nuts x2
Assembly¶
Attach the EMS grill to the Wire Duct Base using 4 M3x6 BHCS screws and M3 nuts.
Loading Wire Duct...
Azimuth: 0°
Polar: 0°
Distance: 0
Pan X: 0
Pan Y: 0