Door Buffer - Voron Standard Door

DraftShift Design

Overview

Summary Printed BOM Hardware BOM Resources

A door buffer for Voron 2.4 Standard Doors.

Short/Standard?

There are different printed files depending on whether you are using Short version of Modular Docks or Standard. If you are unsure, consult the Tools Section for compatibility.

• Voron 250 Short x1 of each [Bottom Left] [Bottom Right] [Top Left] [Top Right] [Top Mid] [Bottom Mid] [Left Mid] [Right Mid]

• Voron 250 Standard x1 of each [Bottom Left] [Bottom Right] [Top Left] [Top Right] [Top Mid] [Bottom Mid] [Left Mid] [Right Mid]

• Voron 300 Short x1 of each [Bottom Left] [Bottom Right] [Top Left] [Top Right] [Top Mid] [Bottom Mid] [Left Mid] [Right Mid]

• Voron 300 Standard x1 of each [Bottom Left] [Bottom Right] [Top Left] [Top Right] [Top Mid] [Bottom Mid] [Left Mid] [Right Mid]

• Voron 350 Short x1 of each [Bottom Left] [Bottom Right] [Top Left] [Top Right] [Top Mid] [Bottom Mid] [Left Mid] [Right Mid]

• Voron 350 Standard x1 of each [Bottom Left] [Bottom Right] [Top Left] [Top Right] [Top Mid] [Bottom Mid] [Left Mid] [Right Mid]

• M3 T-Nut x22

• M3x8 SHCS Screws x20

• M3x20 SHCS Screws x2

• M3 Heat Inserts x8

• Existing Voron Doors With Latches x1

• DraftShift DoorBuffer Github

Assembly

Insert a heat insert into each of the primary pieces.

Loading Door Buffer (Voron Standard Door)...

Azimuth: 0°

Polar: 0°

Distance: 0

Pan X: 0

Pan Y: 0

Step 1 of 9