Blocker - Spring Steel

DraftShift Design

Overview

Summary Printed BOM Hardware BOM Resources

This guide will prepare the Spring Steel Blocker for the Modular Dock.

Silicone Blocker

If you have the LDO Tool and Dock kit, it comes with pre moulded silicone blockers and step 1 can be skipped.

• Blocker - Spring Steel x1 [Standard] [Stubby]

• Clamp x1 [Link]

• Silicone Mould A x1 [Link]

• Silicone Mould B x1 [Link]

• M3 Heat Inserts x6

• RTV Silicone x1

• Spring Steel 7x0.1x36mm x1

• DraftShift ModularDock Github

Assembly

Put a small amount of RTV silicone in the jig and place a small piece of spring steel in the jig. Clamp the 2 pieces together making sure the spring steel doesnt slide out and leave to dry for a minimum of 24 hours. Carefully remove the jig from the Silcone and trim the edges.

Loading Blocker - Spring Steel...

Azimuth: 0°

Polar: 0°

Distance: 0

Pan X: 0

Pan Y: 0

Step 1 of 4