Modular Dock Assembly¶
Overview¶
This guide will guide you through the assembly of the Modular Dock. It is presumed you have already assembled the Blocker, Base and Frame sub-assemblies.
Variations
Spring Steel Blocker, Anthead Base and Standard Crossbar Frame are used for the purpose of this guide. You may be using different parts, but the assembly process is the same.
-
M3 Heat Inserts x4-7
-
M3x20 SHCS x6 for Standard width, x2 for Wide
-
M3x30 SHCS (Wide Only) x4
-
M3x40 SHCS (Stubby Only) x2
-
M3x50 SHCS (Non-Stubby Only) x2
-
M3x10 SHCS x2
-
M3x8 BHCS (Wiper Only) x1
-
PTFE Tube (Wiper Only) x15mm
Assembly¶
Insert the Blocker in to the Base and secure it using 4 M3x20/30 SHCS screws.
Loading Modular Dock Assembly...
Azimuth: 0°
Polar: 0°
Distance: 0
Pan X: 0
Pan Y: 0