Modular Dock Install - Crossbar¶
Overview¶
This guide will guide you through the installation of a Modular Dock for a printer with a Crossbar. These steps will need to be repeated for each tool's dock.
Variations
Spring Steel Blocker, Anthead Base and Standard Crossbar Frame are used for the purpose of this guide. You may be using different parts, but the installation process is the same.
-
M5x10 BHCS x4 (per tool)
-
M5 T Nuts x4 (per tool)
Assembly¶
Add 2 M5 T Nuts to the [Crossbar](../../../door_buffer/#crossbar).
Loading Modular Dock Install - Crossbar...
Azimuth: 0°
Polar: 0°
Distance: 0
Pan X: 0
Pan Y: 0