Printed Shuttle¶
Overview¶
The StealthChanger Printed Shuttle.
Printing
The Shuttle is a critical component for StealthChanger. Make sure you have read the Print Tuning Guide before printing. The StealthChanger Shuttle must be printed with supports.
-
4x6x6mm brass bushings x3 [Aliexpress] [US Amazon] [UK Amazon]
-
6x3mm magnets x3
-
M3x40 SHCS (full thread) x2
-
M3 heat insert (optional) x1
Assembly¶
Install the 3 4x6x6mm bushings into the shuttle ensuring they remain straight. Use a parallel wrench if you have one.
Loading Printed Shuttle Assembly...
Azimuth: 0°
Polar: 0°
Distance: 0
Pan X: 0
Pan Y: 0