Skip to content

Anthead

DraftShift Design

Overview

This guide will walk you through the assembly of an Anthead for StealthChanger with community usermods.

Making the best better?

The stock Anthead works really well with StealthChanger, however with some small tweaks we can make it even better. This guide introduces some community usermods to make a complete and robust solution for reliable tool changes with StealthChanger.

  • Complete Anthead x1 [Link]

  • LED Solder Jig x1 [Link]

  • M3x6 BHCS Screws x6

  • M3x8 BHCS Screws x10

  • M3x12 BHCS Screws x4

  • M3x14 BHCS Screws x2

  • M3x8 SHCS Screws x4

  • M3x12 BHCS Screw x1

  • M3x28 SHCS Screws x2

  • M3 Heat Insert x19

  • 6x3mm N52 Magnets x2

  • Voron Revo Hotend x1

  • Orbiter 2.x Extruder x1

  • Nitehawk36 Toolhead Board x1

  • 25x10mm Radial Fan x1

  • 40x10mm Centrifugal/Blower Fan x2

  • 4x2mm PTFE ~40mm Long x1

Assembly

This guide uses a modified StealthChanger backplate which adds rigid mounting for the toolhead board mount. Both of these mods are by TheSin-. Before starting, ensure you have the correct StealthChanger Backplate for this guide. For assembly of the backplate, see the [StealthChanger Backplate Guide](../../backplates/anthead/).

Loading Anthead...
Azimuth: 0°
Polar: 0°
Distance: 0
Pan X: 0
Pan Y: 0
Step 1 of 30