DragonBurner¶
Overview¶
This guide will walk you through the assembly of an DragonBurner for StealthChanger.
It's your choice
This guide uses the Sherpa Mini extruder, Bambulab Hotend and EBB36 toolhead PCB. You can sway from this configuration if you like, but the hardware BOM may change.
- Complete DragonBurner x1 [Link]
-
M3x8 BHCS Screws x2
-
M3x12 BHCS Screws x2
-
M3x16 BHCS Screws x2
-
M3x20 BHCS Screws x2
-
M3x10 SHCS Screws x1
-
M3x20 SHCS Screws x4
-
M3x40 SHCS Screws x2
-
M3 Heat Insert x8
-
M3 Nut x1
-
5x2mm N52 Magnets x2
-
6x3mm N52 Magnets x2
-
Bambulab Hotend x1
-
Sherpa Mini Extruder x1
-
EBB36 Toolhead Board x1
-
25x10mm or 30x10mm Radial Fan x1
-
40x10mm Centrifugal/Blower Fan x2
-
4x2mm PTFE ~29.5mm Long x1
Assembly¶
This guide will walk you through the assembly of a DragonBurner toolhead for StealthChanger.
Loading DragonBurner...
Azimuth: 0°
Polar: 0°
Distance: 0
Pan X: 0
Pan Y: 0