Extrusion Tophat

DraftShift Design

Overview

Summary Printed BOM Hardware BOM Resources

The Extrusion version of the Tophat uses aluminum extrusions and acrylic panels to create a sturdy frame that looks like extension of the 3d Printer.

Where can I get one?

The hardware components for this guide are all included as a part of LDO's StealthChanger Tophat and Door Buffer Kit.

Frame

This guide assumes you have built a Voron 2.4 3d printer. If you are building this Tophat before your printer, it is highly advised to make yourself familiar with the Voron 2.4 manual in regards to the frame assembly.

• Corner Panel Clips (4mm) x18 [Link]

• Mid Panel Clips (4mm) x18 [Link]

• Hinges x1 [1mm Foam] [3mm Foam]

• Vertical Extrusions x4

• Horizontal Extrusions x8

• M5x16 BHCS x18

• M5 Shim x2

• M3x8 SHCS x59

• M3x12 SHCS x12

• M3 T Nut x82

• 625-2RS Bearing x2

• 5mmx1mmx5m Panel Foam Tape x3

• Tophat Side Panels x4

• Voron Top Panel (From existing printer) x1

• Draftshift TopHat Github

• LDO Github

Assembly

Preload all of the horizontal extrusions with 2 M5x16 screws in each.

Loading Extrusion Tophat...

Azimuth: 0°

Polar: 0°

Distance: 0

Pan X: 0

Pan Y: 0

Step 1 of 18