Axiscope Camera

N3MI

Overview

Summary Printed BOM Hardware BOM Resources

A camera which complements the Axiscope software to get precise XY alignment between the tool's nozzles.

Requires Soldering

This guide requires soldering LEDs on to a PCB. If you are uncomfortable with soldering, there are cameras available for purchase, notably the CXC Camera by Ember Prototypes.

• OV9726 Case x1 [Printables]

• OV9726 Camera Module x1 [Aliexpress]

• 5v 3mm Round White 6000-6500l LEDs x4 [Aliexpress]

• 6x3mm Magnets x4

• Printables Source

• Axiscope Github

Assembly

Install the 4 6x3mm magnets in the Case Lower using glue to keep them in place.

Loading Axiscope Camera...

Azimuth: 0°

Polar: 0°

Distance: 0

Pan X: 0

Pan Y: 0

Step 1 of 6