Door Buffer - LDO Version¶
Overview¶
The LDO version of Door Buffer for Voron 2.4.
Where can I get one?
The hardware components for this guide are all included as a part of LDO's StealthChanger Tophat and Door Buffer Kit.
Short/Standard?
There are different printed files depending on whether you are using short Modular Docks or Standard. If you are unsure, consult the Tools Section for compatibility.
LDO Door
The LDO Door Buffer expects that you will be using the LDO door as indicated in their Voron V2.4 Guide. You can find it here.
-
LDO 300 Short x1 of each [Bottom Left] [Bottom Right] [Top Left] [Top Right] [Top Mid] [Bottom Mid] [Left Mid] [Right Mid]
-
LDO 300 Standard x1 of each [Bottom Left] [Bottom Right] [Top Left] [Top Right] [Top Mid] [Bottom Mid] [Left Mid] [Right Mid]
-
LDO 350 Short x1 of each [Bottom Left] [Bottom Right] [Top Left] [Top Right] [Top Mid] [Bottom Mid] [Left Mid] [Right Mid]
-
LDO 350 Standard x1 of each [Bottom Left] [Bottom Right] [Top Left] [Top Right] [Top Mid] [Bottom Mid] [Left Mid] [Right Mid]
-
M3 heat Set Insert x8
-
M3x8 SHCS Screws x24
-
M3 Hammer Nut x24
-
M5x16 BHCS x2
-
Existing Voron Door With LDO Hinges x1
Assembly¶
Insert a heat insert into each of the primary pieces.